UtilFlow

Chain Link Fence Calculator

Plan a chain link fence: length and height to fabric rolls, line and terminal posts, top rail footage, ties, and concrete bags — materials and cost in one place, all prices adjustable.

1. Enter length and height

Add the run in feet and pick 4, 5, or 6 ft height.

2. Set terminal posts and prices

Count corners and gates, then adjust local prices for rolls, posts, and rail.

3. Copy the materials list

Take rolls, posts, rail footage, and cost to the supplier.

Materials list
2
fabric rolls (50-ft)
13
posts (9 line)
100
ft top rail
$862
est. cost

~65 fence ties (5/post) · 13 concrete bags (1/post) · tension wire and brace bands sold separately

What's next?

Keep the project moving — your numbers carry over automatically.

Related tools

Useful next steps

Terminal vs line posts

Terminal posts (corners, ends, gates) carry all the tension — they get larger diameter pipe and concrete footings with bracing. Line posts just hold the mesh up every 10 ft. Under-speccing terminals is the #1 cause of sagging chain link.

The 50-ft roll rule

Fabric comes in 50-ft rolls and can't be spliced invisibly — always round rolls up. A 110-ft run needs 3 rolls, and the leftover 40 ft starts your next section or becomes a gate frame.

Top rail vs tension wire

Top rail (pipe along the top) is standard for 5–6 ft fences and keeps the mesh rigid. Budget 4-ft fences often use tension wire instead — cheaper, but the top edge waves over time.

Chain Link Fence Calculator FAQ

What are the common chain link fence heights?

4 ft for gardens and dogs, 5 ft for side yards, 6 ft for backyards and security. Commercial goes to 8–12 ft with barbed wire. Residential rolls come 50 ft long in each height.

What mesh size for chain link: 2″ or 2⅜″?

2″ diamond is the residential standard. 2⅜″ is lighter-duty (garden edging, temporary fence). For dog kennels or security, look at 9-gauge wire in 2″ mesh — gauge matters more than mesh size for strength.

How do corners work on a chain link fence?

Every corner, end, and gate gets a terminal post (heavier than line posts) with bracing. Count them in the terminal posts input — line posts go every 10 ft between terminals.

How much concrete per chain link post?

About one 50–80 lb bag per post for a standard 10″ × 30″ hole. This calculator assumes one bag per post — use the “What's next” card to price it precisely.

Can I save this materials list?

Yes. The “Add to list” button saves the rolls, posts, rail, and cost to your project list — stored in your browser, printable and exportable as PDF.