1. Pick your roll size
Match the product label: US single 20.5″ × 16.5 ft, US double 20.5″ × 33 ft, or EU 21″ × 33 ft. Use a preset only when its dimensions match.
Stop guessing wallpaper rolls: wall width and height, door/window deductions, roll size, and pattern repeat to an exact strip count and roll count — with US single/double and EU roll presets and a spare-roll option.
Match the product label: US single 20.5″ × 16.5 ft, US double 20.5″ × 33 ft, or EU 21″ × 33 ft. Use a preset only when its dimensions match.
Total wall width, height, doors/windows, and the pattern repeat printed on the roll.
Enter the price for one entire roll of the selected size. The count and optional spare use that same size; one double roll counts as one roll here.
Match the dimensions to your product label. One 33-ft US double roll counts as one roll here. Use the price for that entire roll; some stores quote a single-roll price but sell double rolls.
24 strips across 40 ft · each strip 108″ long (height + repeat) · doors/windows counted as 21/15 sq ft
What's next?
Keep the project moving — your numbers carry over automatically.
Strips = ceiling(total wall width ÷ roll width). Each strip's cut length = wall height + one full pattern repeat. Strips per roll = floor(roll length ÷ strip length). The repeat is the hidden cost — a 24″ repeat on 8-ft walls wastes nearly a third of every roll.
These presets use a 20.5″ × 16.5-ft US single roll (~28 sq ft), a 20.5″ × 33-ft US double roll (~56 sq ft), and a 21″ × 33-ft EU roll (~58 sq ft). Dimensions vary by product, so match the label rather than the name alone. US wallpaper is often sold as one continuous double roll, sometimes priced per single roll. This calculator counts each selected roll as one unit: use the price for the entire roll, including both single-roll units when buying a double roll. Printed coverage is before cutting and pattern waste.
Wallpaper is printed in batches (dye lots). Two rolls from different lots can differ visibly on the wall. Buy all rolls at once from the same lot number — the spare roll this calculator adds isn't just for mistakes, it's insurance against a mismatched reorder.
The repeat is the vertical distance before the pattern starts over (printed on every roll, e.g. 12″ or 24″). Each strip must be cut longer by one repeat so the pattern lines up — this calculator adds the repeat to every strip, which is where most DIY estimates go wrong.
For 40 ft of wall width, 9-ft walls, no pattern repeat, and no door/window deductions, a 20.5″ × 33-ft US double roll yields 3 full strips. The 24 strips need 8 rolls, or 9 including one spare. At $60 per double roll, that is $540 including the spare.
Yes — one spare roll is the industry standard. Dye lots vary between print runs, so a later reorder may not match. The calculator adds the spare by default; unopened rolls are usually returnable.
Yes. This calculator deducts 21 sq ft per door and 15 sq ft per window from the strip count, so you don't buy paper for openings.
Use the “What's next” card below your result — your wall area carries over to the paint calculator so you can compare the cost of painting the same walls.