UtilFlow

Gravel Calculator

Find out how much gravel your project needs: cubic yards and tons from length, width, and depth, with adjustable stone density, depth guidance for driveways and walkways, and a delivered cost estimate.

1. Enter area and depth

Add length and width in feet plus your target depth in inches — 4 inches for driveways, 3 for walkways.

2. Review tons, yards, and cost

See cubic yards and tons at your stone density, with a delivered cost estimate you can adjust.

3. Copy your order

Copy the quantities to order bulk gravel or get quotes from local suppliers.

Your estimate
2.47
cubic yards
3.46
tons
$156
est. cost

66.7 cu ft · driveways: 4 in compacted · walkways: 3 in · 1 yd³ ≈ 1.4 tons

Related tools

Useful next steps

How gravel volume converts to tons

Cubic feet is length × width × (depth in inches ÷ 12). Divide by 27 for cubic yards. Multiply cubic yards by the stone density — about 1.4 tons per yard for crushed stone, 1.3–1.5 depending on type and moisture — to get tons. Suppliers sell bulk gravel by the ton, so the tons figure is your order quantity.

Depth guide by project

Driveways: 4 inches compacted. Walkways: 3 inches. Patios: 2–3 inches over a compacted base. French drains and drainage beds: 6 inches or more around the pipe. Always compact in 2-inch lifts with a plate compactor; loose gravel compacts roughly 15–20%, so order 5–10% extra.

Bags vs bulk delivery

Bagged gravel (usually 0.5 cu ft bags) makes sense for tiny repairs. Beyond about 1 ton, bulk delivery is far cheaper per ton — a full dump truck carries 10–20 tons. Ask about delivery fees and minimum orders; many quarries waive the fee above 5 tons.

Gravel Calculator FAQ

How much area does a ton of gravel cover?

One ton covers roughly 100 square feet at 2 inches deep. Because a cubic yard of gravel weighs about 1.4 tons, a ton equals around 19 cubic feet — divide by your depth in feet for the coverage.

How thick should a gravel driveway be?

Use 4 inches of compacted gravel for driveways: a 2–3 inch base of larger crushed stone topped with 1–2 inches of finer surface gravel. Walkways and patios need about 3 inches.

What is the difference between crushed stone and pea gravel?

Crushed stone has angular edges that lock together, making it ideal for driveways and bases. Pea gravel is naturally rounded, comfortable underfoot, and better for decorative beds and paths where shifting is acceptable.

Can I chain this with the sand or concrete calculator?

Yes. The “What's next” cards below your result carry your dimensions forward — into the sand calculator for 1-inch paver bedding, or into the concrete calculator if you're pouring a slab on this base.