UtilFlow

Concrete Slab Calculator

Plan a concrete slab pour: length × width × thickness to cubic yards and bag counts, wire mesh sheet quantities, and an adjustable cost estimate — with 4″ and 6″ thickness presets for patios vs driveways.

1. Pick a thickness

Use 4″ for patios and walkways, 6″ for driveways — or enter a custom thickness.

2. Enter slab size

Add length and width in feet, waste allowance, and your local price per cubic yard.

3. Copy the materials list

Get cubic yards, 80/60-lb bag counts, wire mesh sheets, and cost to take to the supplier.

Your estimate
3.11
cubic yards
140
80-lb bags
5
mesh sheets (5×10)
$467
est. cost

240 sq ft slab · 5% waste included · wire mesh sheets cover 50 sq ft each (overlap 6″)

Related tools

Useful next steps

The 4 vs 6 inch decision

Concrete's strength comes mostly from thickness: doubling thickness roughly quadruples load capacity. 4″ handles foot traffic and patio furniture; 6″ handles cars and trucks. Going thinner than 4″ to save money is the most common cause of cracked DIY slabs.

Wire mesh math

Welded wire mesh comes in 5×10 ft sheets covering 50 sq ft each. Divide slab area by 50 and round up — the 6-inch overlap at seams is already absorbed by rounding. Lay mesh on chairs so it sits mid-slab, not on the ground.

Order a little extra

The calculator defaults to 5% waste, but irregular forms and subgrade dips can eat more. For ready-mix, a short load fee makes reordering expensive — 5–7% overage is cheap insurance against a second truck.

Concrete Slab Calculator FAQ

How thick should a concrete slab be?

4 inches is standard for patios, walkways, and shed floors. Go 6 inches for driveways and anywhere vehicles drive. Thinner than 4″ cracks easily; this calculator defaults to 4″ with a 6″ preset.

Does a concrete slab need rebar or wire mesh?

A 4″ slab benefits from 6×6 wire mesh to control shrinkage cracks — this calculator counts the 5×10 ft mesh sheets for you. For driveways or heavy loads, add #4 rebar on 18″ centers instead of (or with) mesh.

How many bags of concrete for a slab?

Divide total cubic feet by the bag yield: 0.6 cu ft per 80-lb bag, 0.45 per 60-lb bag. A 20×12 ft slab at 4″ needs about 107 eighty-pound bags — which is why ready-mix wins above ~1–2 yards.

Can I price this slab pour in detail?

Yes. Use the “What's next” card below your result — your cubic yards carry over to the concrete cost calculator for a ready-mix vs bags comparison with delivery fees.

Can I save this estimate to my project list?

Yes. The “Add to list” button saves the slab dimensions, bag count, and cost to your project list — stored in your browser, printable and exportable as PDF.