1. Enter wall size
Add wall length and height in feet, plus any door/window openings to deduct.
Estimate a concrete block wall: wall length and height to 8×8×16 CMU block count with door/window deductions, mortar bags at 3/8″ joints, and adjustable pricing — with waste allowance built in.
Add wall length and height in feet, plus any door/window openings to deduct.
Toggle mortar bags on and adjust your local block and mortar prices.
Take block count, mortar bags, and cost to the masonry supplier.
5% waste included · 1 block ≈ 0.89 sq ft with ⅜″ joints · ~30 blocks per 80-lb mortar bag
What's next?
Keep the project moving — your numbers carry over automatically.
Wall area minus openings, divided by 0.889 sq ft per block (with mortar joints), plus waste. The waste percentage matters more than people think — cutting half blocks for corners and openings wastes 5–10% even for pros.
Type S is the default for block walls (stronger, better for below grade). Type N works for above-grade non-structural walls. Don't use mortar mix for grouting cores — grout is a different, more fluid mix.
Each course is 8″ with joints, so plan wall heights in 8″ increments: 32″ = 4 courses, 48″ = 6 courses. Odd heights mean cutting every block in the top course — or adjusting the footing depth.
The standard CMU is 8×8×16 inches nominally (actual 7⅝×7⅝×15⅝). With a ⅜″ mortar joint it covers 16″ × 8″ = 0.89 sq ft — about 112.5 blocks per 100 sq ft of wall, which is the math this calculator uses.
An 80-lb bag of Type S mortar lays roughly 25–35 blocks at ⅜″ joints. This calculator uses 30 blocks per bag — buy a couple extra bags; running out mid-course means a visible color change.
Not always. Garden and retaining walls under 4 ft are often dry-stacked or mortared without grout. Structural walls, tall walls, and walls with rebar need grouted cores — check your local code before building.
A poured concrete footing, typically twice as wide as the wall and below the frost line. Use the “What's next” card to size the footing concrete.
Yes. The “Add to list” button saves the block count, mortar bags, and cost to your project list — stored in your browser, printable and exportable as PDF.