1. Enter area and tile size
Add the square footage and your tile dimensions, then pick a layout — waste is adjusted automatically.
Estimate tile quantities from area and tile size: tile count with waste factor, thinset mortar bags, and grout — with layout presets for straight, diagonal, and herringbone patterns.
Add the square footage and your tile dimensions, then pick a layout — waste is adjusted automatically.
See tile count with waste, thinset bags at real coverage, and a grout estimate.
Copy tile boxes, mortar, and grout for the tile shop.
straight layout · 10% waste included · thinset in 50-lb bags · grout is a rough estimate
Divide the project area by the area of one tile (width × length in feet), multiply by 1 plus the waste factor, and round up to full boxes — check the box coverage on the label. Measure each area separately for L-shaped rooms rather than guessing one rectangle.
Straight grid: 10% waste. Diagonal: 15% — every edge tile becomes two cuts. Herringbone and chevron: 15–20% plus real layout time. Large-format tiles (12×24 and up) also want a flat substrate; budget a self-leveling underlayment if the floor varies more than 1/4 inch over 10 feet.
Thinset (mortar) bonds tile to the substrate; grout fills the joints. Never substitute one for the other. Comb thinset in straight lines with the flat side of the trowel first, then notch — and back-butter any tile with a side over 15 inches.
Use 10% for straight layouts, 15% for diagonal, and 15–20% for herringbone. Small rooms with many cuts around fixtures need the higher end even for straight layouts.
A 50-lb bag covers roughly 40–50 square feet with a 1/4-inch square-notch trowel. Large-format tiles need a bigger notch and back-buttering, so coverage drops to about 30–40 square feet per bag.
As a rough guide, plan about 1 pound of grout per 25–30 square feet for standard joints. Wide joints and small tiles consume noticeably more. Use sanded grout for joints 1/8 inch and wider, unsanded for smaller.
Click “Add to list” on your result — it joins your project list (bottom-right button), where you can name the project, add notes like tile color or box size, and download everything as a PDF.