1. Enter area and surface
Add the area in sq ft and pick the surface — new drywall drinks more than a repaint.
Size your primer: paintable area and surface type (new drywall, dark-to-light, bare wood, exterior) to primer gallons with per-surface coverage rates — plus a direct link to the topcoat paint calculator.
Add the area in sq ft and pick the surface — new drywall drinks more than a repaint.
One coat is usually enough; adjust your local primer price per gallon.
Take the primer gallons, then size the topcoat with one click.
Exact: 1.53 gal (rounded up to buy) · New drywall · base coverage 300 sq ft/gal
What's next?
Keep the project moving — your numbers carry over automatically.
Real primer seals porous surfaces and creates uniform absorption so the topcoat covers evenly. Paint+primer combos skip the sealing step — fine for repaints, a recipe for flashing (shiny/dull patches) on new drywall.
For dark-to-light or bold topcoat colors, have the store tint the primer toward the finish color (usually 50% formula). It can save an entire topcoat — the most expensive coat is the one you didn't need.
Joint compound absorbs primer differently than the paper face, causing flashing. A dedicated PVA drywall primer (or any quality primer) evens out absorption — the calculator's new-drywall rate accounts for the extra soak.
New drywall, bare wood, dark-to-light color changes, stained or patched spots, and exterior bare surfaces. Previously painted walls in good condition in a similar color can usually skip it.
No — “paint + primer” products are just thicker paint, not real primer. They don't seal porous drywall or block stains. For new drywall or problem surfaces, use a dedicated primer first.
About 300 sq ft per gallon on a sealed surface. New drywall and bare wood absorb more — this calculator applies per-surface multipliers so thirsty surfaces get the extra gallon they need.
Use the “What's next” card below your result — your area carries over to the paint calculator for exact topcoat gallons.
Yes. The “Add to list” button saves the primer gallons and cost to your project list — stored in your browser, printable and exportable as PDF.