1. Enter patio area and paver size
Add the area in sq ft and your paver dimensions in inches.
Plan a paver patio or walkway: area and paver size to paver count with cutting waste, crushed-stone base depth, bedding sand, and polymeric joint sand — with links to size the base materials precisely.
Add the area in sq ft and your paver dimensions in inches.
Defaults: 5″ compacted base, 1″ bedding sand — adjust for soil and load.
Pavers, base gravel, bedding sand, and polymeric sand in one list.
8% cutting waste · base gravel ordered by the yard, bedding sand by the yard or bag · cost shows pavers + joint sand only
What's next?
Keep the project moving — your numbers carry over automatically.
Pavers are just the wearing surface — 90% of a patio's longevity is the base. Excavate to undisturbed soil, lay geotextile on clay, compact crushed stone in lifts, and screed exactly 1″ of coarse concrete sand. Skimp the base and the prettiest pavers still sink.
Pavers spread sideways under load without edge restraint. Plastic paver edging spiked every foot, or a concrete haunch, keeps the field tight — budget it before you start, not after the edges migrate.
The 8% default covers border cuts on a rectangular patio. Curves, circles, and herringbone patterns push waste to 12–15% — bump the percentage for anything that isn't a straight rectangle.
4–6 inches of compacted crushed stone for patios and walkways (this calculator defaults to 5″), 6–12″ for driveways. The base — not the pavers — is what keeps a patio from settling.
Polymeric sand: sweep it into the joints, mist with water, and it hardens to lock pavers and block weeds. About one 50-lb bag per 80–100 sq ft. Don't use play sand — it washes out.
Yes — rent one. Compact the base in 2″ lifts, then compact the pavers into the bedding sand after laying. Hand tamping can't match a plate compactor's density, and skipping it means a wavy patio in two years.
Use the “What's next” cards below your result — your area and depths carry over to the gravel and sand calculators automatically.
Yes. The “Add to list” button saves pavers, base, sand, and cost to your project list — stored in your browser, printable and exportable as PDF.