1. Enter roof pitch
Add the rise in inches over a 12-inch run — for example 6 for a 6/12 pitch.
Convert roof pitch (rise over 12-inch run) to degrees, and get common rafter length from building span with adjustable overhang — a small, precise tool for roofing and framing planning.
Add the rise in inches over a 12-inch run — for example 6 for a 6/12 pitch.
Enter the building span and eave overhang to size the common rafter.
Get the pitch angle in degrees and the rafter length including overhang.
Rafter = √(run² + rise²) · run = half span + overhang · 174.4 inches total
What's next?
Keep the project moving — your numbers carry over automatically.
Roof pitch is rise over a fixed 12-inch run. The angle in degrees is arctangent(rise ÷ 12). So 4/12 → 18.4°, 6/12 → 26.6°, 8/12 → 33.7°, 12/12 → 45°. Building codes and shingle warranties reference pitch, while cut angles for rafters use degrees.
A common rafter spans half the building width (the run). Rise equals pitch ÷ 12 × run, and rafter length is √(run² + rise²) by the Pythagorean theorem. Add the overhang horizontally before computing: total run = half-span + overhang, then recompute rise and rafter length on the longer triangle.
Pitch controls drainage speed, which materials are allowed, usable attic space, and snow load behavior. Low-slope roofs (below 4/12) drain slowly and demand meticulous waterproofing; steep roofs shed water fast but cost more in material and labor because of staging and safety.
A 4/12 pitch equals 18.4 degrees, found with arctangent(4/12). Common conversions: 6/12 is 26.6°, 8/12 is 33.7°, and 12/12 is exactly 45°.
Pitches above 6/12 (26.6°) are generally considered steep-slope. Roofs up to about 6/12 can be walked carefully with proper footwear; anything steeper needs roof jacks or staging for safe work.
Yes. Standard asphalt shingles need at least a 4/12 pitch (2/12–4/12 requires special low-slope application with extra underlayment). Below 2/12, use membrane roofing like TPO or EPDM instead of shingles.
Use the “What's next” card below your result — your pitch carries over to the shingle calculator, which figures bundles, squares, and underlayment rolls from your roof footprint.