1. Enter fence length
Add the run in feet — or carry it over from the fence calculator automatically.
Count fence pickets: run length, picket width, and gap spacing to an exact picket count with waste — with standard and board-on-board styles, adjustable pricing, and a link to full fence materials.
Add the run in feet — or carry it over from the fence calculator automatically.
Pick width, gap, and standard vs board-on-board construction.
Take the count with waste to the lumberyard.
10% waste for splits and warps · standard single layer · dog-ear vs flat-top doesn't change the count
What's next?
Keep the project moving — your numbers carry over automatically.
Pickets = run length ÷ (picket width + gap), rounded up. Board-on-board multiplies by ~1.85 for the overlapping second layer. The calculator applies your waste percentage last — waste covers splits and culls, not math.
Pickets are the visible face of the fence — spend the extra 30¢ per board for #1 grade or cedar, and save money on the hidden rails and posts instead. A fence looks only as good as its worst picket.
Stack pickets with spacers for a few days before installing. Fresh pressure-treated pickets are wet and heavy; they shrink as they dry, which opens up gaps you didn't plan for.
¼ inch is the sweet spot for standard picket fences — it allows for wood expansion without visible gaps when boards shrink. For board-on-board, there is no gap: boards overlap instead.
5½-inch pickets (nominal 1×6) are the standard for 6-ft privacy fences. Wider 7¼″ (1×8) pickets need fewer boards but warp more visibly; narrower pickets look busier but stay straighter.
10% is the safe default: warped boards, split ends, and miscuts. Cull the worst boards at the store — lumberyards expect you to pick through the stack.
With 5.5″ pickets and ¼″ gaps: about 208 pickets plus waste. Enter your exact length above — and use the “What's next” cards for the full materials list and installed cost.
No — the count is the same. Only board-on-board changes it (about 85% more pickets for the overlapping back layer). Style affects looks and price per picket, not quantity.