1. Enter footprint and pitch
Add the roof footprint and pitch — the slope factor converts it to true roof area.
Estimate roofing shingles from footprint and pitch: roof surface area via slope factor, bundles and squares with waste, plus underlayment rolls — with adjustable local pricing.
Add the roof footprint and pitch — the slope factor converts it to true roof area.
See bundles, squares, and underlayment rolls with your waste allowance.
Copy everything for the roofing supplier.
1677 sq ft roof surface (footprint × 1.118 slope factor) · 3 bundles = 1 square (100 sq ft) · underlayment ≈ 400 sq ft/roll (#15 felt)
Roofing is sold by the square — 100 sq ft of roof area. Three bundles cover one square. Always round bundles up: a half-used bundle can't cover the next roof.
Roof surface = footprint × slope factor, where slope factor = √(1 + (rise/12)²). A 6/12 pitch multiplies area by 1.118; a 12/12 pitch by 1.414. Steeper roofs need more material and more labor.
Beyond shingles: underlayment rolls, drip edge for rakes and eaves, ridge cap shingles (≈1 bundle per 30 linear ft of ridge), roofing nails, and ice-and-water shield for eaves in snow country.
Three bundles make one square (100 sq ft) for standard 3-tab and architectural shingles. Divide your roof area by 100, multiply by 3, add waste, and round up.
Use 10% for a simple gable roof and 15% or more for hips, valleys, and dormers — every angle means more cuts.
Yes. Cover the deck with #15 felt (≈400 sq ft per roll) or synthetic underlayment, plus ice-and-water shield along eaves and valleys in cold climates.
Yes. Open this calculator from the “What's next” card on the roof pitch calculator and your pitch value carries over — you only enter the footprint.