UtilFlow

Drywall Calculator

Estimate drywall materials from wall area: 4×8 sheet count, joint compound gallons, tape footage, and screw count — with spacing guidance for walls and ceilings.

1. Enter wall area

Add total wall and ceiling square footage — or room dimensions and let the tool total it.

2. Review sheets, mud, tape, screws

See 4×8 sheet count, joint compound gallons, tape footage, and screw count instantly.

3. Copy your materials list

Copy everything for the lumberyard, including the 5-gallon mud buckets.

Materials list
14
sheets (4×8)
4.0
gal joint compound
420
ft joint tape
448
screws

1 sheet = 32 sq ft · mud ≈ 1 gal / 100 sq ft · screws 16" walls / 12" ceilings (≈32/sheet)

What's next?

Keep the project moving — your numbers carry over automatically.

Related tools

Useful next steps

Sheet count math

Divide total area by 32 (one 4×8 sheet) and round up, then add 5–10% for cuts around doors, windows, and outlets. For a single room, measure each wall separately and add ceiling area — guessing one number undercounts inside corners and soffits.

Mud, tape, and screws

Joint compound: about 1 gallon per 100 square feet across three coats (tape, fill, skim). Paper tape: roughly 30 linear feet of joints per sheet. Screws: 16-inch spacing on walls and 12-inch on ceilings averages 32 screws per sheet — buy 5-lb boxes, not loose.

Hanging tips that save taping time

Hang ceilings before walls, stagger vertical joints between rows, and leave a 1/2-inch gap at the floor for expansion. Tight butt joints need less mud than gappy ones — measure twice, cut once applies double to drywall.

Drywall Calculator FAQ

How big is a sheet of drywall?

Standard sheets are 4×8 feet (32 square feet). 4×12 sheets mean fewer seams on long walls. Use 1/2-inch for walls and 5/8-inch for ceilings and fire-rated assemblies.

How far apart should drywall screws be?

Space screws 16 inches apart on walls and 12 inches on ceilings, which works out to about 32 screws per 4×8 sheet. Keep screws 3/8 inch from sheet edges to avoid blowout.

How much joint compound do I need?

Plan about 1 gallon per 100 square feet — roughly 3 gallons per 10 sheets. Joint compound is cheapest in 5-gallon buckets; premixed is easiest for DIY taping.

How do I estimate paint for new drywall?

Use the “What's next” card below your result — your wall area carries over to the paint calculator automatically, with primer included (new drywall always needs it).