1. Pick a depth preset
Lawn topdress, new lawn, garden bed, or raised bed — or enter a custom depth in inches.
Size your topsoil order: bed length × width × depth to cubic yards, tons, and 40-lb bag counts — with depth presets for lawns, garden beds, and raised beds, plus a settling allowance and local price estimate.
Lawn topdress, new lawn, garden bed, or raised bed — or enter a custom depth in inches.
Add length and width in feet, settling allowance, and your local price per cubic yard.
Take cubic yards, tons, bag count, and cost to the landscape supplier.
200 sq ft · 12% settling included · bagged soil wins under ~1 yard; bulk delivery wins above it
What's next?
Keep the project moving — your numbers carry over automatically.
A cubic yard is 27 cubic feet, and a 40-lb bag holds about 0.5 — so one yard equals roughly 54 bags. At $4–$5 per bag that's $200+ versus $30–$60 bulk. The calculator shows both so the break-even is obvious.
Topdressing a lawn: 1–2″. New lawn from seed: 4–6″ of loosened soil. Vegetable/flower beds: 6–8″. Raised beds: 10–12″. Regrading low spots: measure the deepest point, then average — low areas eat more soil than they look.
Suppliers sell by the cubic yard, but trucks are often weighed — wet soil weighs more without giving you more volume. Ask whether the price is per yard or per ton, and compare on the same basis.
6 inches of good topsoil suits most vegetables and flowers; 2–4 inches works for topdressing an existing lawn, and raised beds typically run 12 inches deep. This calculator has one-click presets for each case.
Screened topsoil weighs roughly 1.2–1.4 tons per cubic yard depending on moisture — this calculator uses 1.3. Wet soil after rain can weigh noticeably more, so order by volume (yards) when you can.
Bags win under about 1 cubic yard (a 40-lb bag holds ~0.5 cu ft). Above that, bulk delivery at $30–$60 per yard is far cheaper — a 20×10 ft bed at 6 inches needs about 3.7 yards, which would be ~200 bags.
Loose topsoil settles 10–20% after watering and a few weeks of weather. The calculator defaults to 12% extra so beds don't end up low — running short means a second delivery fee.
Yes. The “Add to list” button saves the dimensions, yardage, tonnage, and cost to your project list — stored in your browser, printable and exportable as PDF.