1. Enter room dimensions
Add length, width, and ceiling height, plus door and window counts — their area is deducted automatically.
Find out how much paint you need: wall area with doors and windows deducted, gallons for your coat count at real coverage rates, plus primer quantity — all adjustable to your room and paint.
Add length, width, and ceiling height, plus door and window counts — their area is deducted automatically.
See paint gallons for your coat count at real coverage rates, plus primer for new or dark surfaces.
Copy the quantities for the paint store, including a touch-up allowance.
Don't forget
1 roller cover (one per ~400 sq ft) · 1 roll of painter's tape (60-yd rolls) · 1–2 drop cloths · a 2″ angled brush for cutting in
1.61 gal exact (2 coats @ 350 sq ft/gal) · doors −20 sq ft each · windows −15 sq ft each
Wall area is 2 × (length + width) × ceiling height, minus 20 square feet per door and 15 per window. Multiply by the number of coats, then divide by coverage per gallon (350 for smooth walls). Round up — paint is sold by the gallon and quart, and running out mid-wall leaves visible lap marks.
Prime new drywall, patched areas, dark-to-light color changes, stained or glossy surfaces, and bare wood. Primer covers about 300 square feet per gallon and only needs one coat. Skipping primer on new drywall causes uneven sheen (flashing) that two topcoats cannot fully hide.
Buy 10% extra for touch-ups and store leftovers for repairs — unopened cans are usually returnable. Five-gallon buckets cost less per gallon for whole-house jobs. Flat and matte hide wall flaws; eggshell and satin wipe clean in kitchens, baths, and hallways.
About 350 square feet per coat on smooth primed walls, 250–300 on textured or porous surfaces. Always check the can — coverage varies by brand and sheen.
Two coats for any color change. One coat can work for a same-color refresh on walls in good shape. New drywall and dark-to-light changes need a primer coat plus two topcoats.
Use a tinted primer first, then two topcoats. Piling on extra coats of light paint without primer wastes paint and still shows the old color through.
Yes — check “Include ceiling”. In room mode it uses length × width; in wall-area mode it estimates the ceiling at 25% of wall area. Ceiling paint is counted separately at the same coat count.
Yes — switch to “Wall area directly” mode. This is also how areas carry over automatically when you arrive from the drywall or fence calculators via their “What's next” cards.