UtilFlow

Concrete Block Calculator

Estimate a concrete block wall: wall length and height to 8×8×16 CMU block count with door/window deductions, mortar bags at 3/8″ joints, and adjustable pricing — with waste allowance built in.

1. Enter wall size

Add wall length and height in feet, plus any door/window openings to deduct.

2. Set mortar and prices

Toggle mortar bags on and adjust your local block and mortar prices.

3. Copy the estimate

Take block count, mortar bags, and cost to the masonry supplier.

Your estimate
95
blocks (8×8×16)
4
mortar bags
$286
est. cost

5% waste included · 1 block ≈ 0.89 sq ft with ⅜″ joints · ~30 blocks per 80-lb mortar bag

What's next?

Keep the project moving — your numbers carry over automatically.

Related tools

Useful next steps

Block math

Wall area minus openings, divided by 0.889 sq ft per block (with mortar joints), plus waste. The waste percentage matters more than people think — cutting half blocks for corners and openings wastes 5–10% even for pros.

Mortar type matters

Type S is the default for block walls (stronger, better for below grade). Type N works for above-grade non-structural walls. Don't use mortar mix for grouting cores — grout is a different, more fluid mix.

Coursing height

Each course is 8″ with joints, so plan wall heights in 8″ increments: 32″ = 4 courses, 48″ = 6 courses. Odd heights mean cutting every block in the top course — or adjusting the footing depth.

Concrete Block Calculator FAQ

How big is a standard concrete block?

The standard CMU is 8×8×16 inches nominally (actual 7⅝×7⅝×15⅝). With a ⅜″ mortar joint it covers 16″ × 8″ = 0.89 sq ft — about 112.5 blocks per 100 sq ft of wall, which is the math this calculator uses.

How many blocks does one bag of mortar lay?

An 80-lb bag of Type S mortar lays roughly 25–35 blocks at ⅜″ joints. This calculator uses 30 blocks per bag — buy a couple extra bags; running out mid-course means a visible color change.

Do block walls need to be filled with concrete (grouted)?

Not always. Garden and retaining walls under 4 ft are often dry-stacked or mortared without grout. Structural walls, tall walls, and walls with rebar need grouted cores — check your local code before building.

What goes under a block wall?

A poured concrete footing, typically twice as wide as the wall and below the frost line. Use the “What's next” card to size the footing concrete.

Can I save this estimate to my project list?

Yes. The “Add to list” button saves the block count, mortar bags, and cost to your project list — stored in your browser, printable and exportable as PDF.